Midea WHS-625FWESS1 Energy Guide

To adjust the temperature settings, locate the control panel inside the refrigerator compartment. Use the up and down arrows to set your desired temperature for both the refrigerator and freezer.
First, ensure that the refrigerator is plugged in and the power is on. Check if the temperature settings are correctly set. Make sure the door seals are clean and sealing properly. If the problem persists, consult the user manual or contact customer support.
It is recommended to clean the condenser coils every six months to ensure efficient operation. This can be done using a vacuum cleaner or a soft brush.
To defrost the freezer, turn off the refrigerator and remove all items. Leave the freezer door open to allow the ice to melt. Once defrosted, clean and dry the interior before turning the unit back on.
Yes, you can install the refrigerator in a garage, but ensure the ambient temperature is within the operational range of the appliance, typically between 50°F and 110°F.
To replace the light bulb, first unplug the refrigerator. Locate the light cover inside the refrigerator compartment, remove it, and replace the bulb with a new one of the same type and wattage.
Normal operational sounds include humming, clicking, or a whooshing noise as the compressor and fans work. If you hear loud or unusual noises, ensure the refrigerator is level and check for loose parts.
Ensure the ice maker is turned on and the water supply is connected. Check for any blockages in the ice maker or water line. If issues continue, consult the user manual or contact customer service.
Check the drain hole at the back of the refrigerator compartment for blockages. Clean it with warm water and a small brush. Ensure the refrigerator is level to allow proper drainage.
Locate the water filter, typically inside the refrigerator compartment, and turn it counterclockwise to remove. Replace with a new filter by turning it clockwise until it locks into place. Reset the water filter indicator if necessary.