Midea WHS-507FWESS1 Energy Guide
![Midea WHS-507FWESS1 Refrigerator manual cover](/images/igPEmEaqaWizNCuLqFAnpAlt/thumbs/thumb175x175.webp)
To adjust the temperature settings, locate the temperature control knob inside the refrigerator compartment. Turn the knob to the desired setting, with a higher number indicating a colder temperature.
Ensure that the refrigerator is plugged in and the power is on. Check that the temperature setting is correct and that the door seals are clean and sealing properly. If the issue persists, consider contacting a professional technician.
It is recommended to defrost the refrigerator once the frost build-up reaches about a quarter-inch thick to ensure optimal performance.
Yes, the Midea WHS-507FWESS1 allows for reversible door installation. Follow the instructions in the user manual for changing the door swing direction.
To clean the interior, remove all food items and shelves. Use a solution of mild detergent and warm water to wipe down the surfaces. Rinse with clean water and dry with a soft cloth before replacing the shelves and food.
Water leakage can be caused by a blocked defrost drain. Clear any blockages in the drain tube using warm water or a small brush. If the problem continues, seek professional assistance.
Ensure that the refrigerator is positioned away from heat sources and has adequate ventilation. Keep the door seals clean and ensure the door closes tightly. Avoid frequent opening of the door.
Check if the refrigerator is level and ensure it is not in contact with any external objects. Listen for the source of the noise and, if necessary, consult the user manual or contact customer support for assistance.
Unplug the refrigerator and locate the light bulb cover inside the unit. Remove the cover, unscrew the old bulb, and replace it with a new one of the same type and wattage. Reattach the cover and plug the unit back in.
Check for obstructions in the door seal and remove any debris. Ensure that the refrigerator is level and that the door hinges are aligned correctly. Adjust the leveling feet if necessary.