Midea MDT24H3AST Energy Guide
![Midea MDT24H3AST Dishwasher manual cover](/images/XhempPwLvTEXzjtcuETePzpu/thumbs/thumb175x175.webp)
To reset the Midea MDT24H3AST dishwasher, press and hold the Start/Reset button for about 3 seconds. This will clear any current settings and restart the machine.
Check the drain hose for any kinks or blockages. Also, ensure that the sink drain is clear. If the problem persists, inspect the dishwasher filter and clean it if necessary.
It is recommended to clean the filter every month to ensure optimal performance and to prevent any build-up that could lead to clogs.
No, you should not use regular dish soap as it can cause excessive suds and potentially damage the dishwasher. Always use dishwasher-specific detergents.
Unusual noises may be due to dishes or utensils touching each other or the spray arm. Ensure that items are properly loaded and that the spray arm can rotate freely.
Regular maintenance includes cleaning the filter, checking the spray arms for blockages, wiping down the door seals, and ensuring the drain hose is clear.
To adjust the rinse aid level, open the rinse aid dispenser and turn the dial inside to the desired setting, which usually ranges from 1 to 6.
Ensure that the dishwasher is not overloaded and that the spray arms are not obstructed. Also, use the correct amount of detergent and check that the water temperature is at least 120°F (49°C).
A bad smell can result from food particles trapped in the filter or gasket. Clean these areas and run a cleaning cycle with dishwasher cleaner or a cup of white vinegar.
To improve drying, use rinse aid, ensure that the "heated dry" option is selected, and open the door slightly after the cycle to allow steam to escape.