McCulloch TITANIUM 46SD Spare Parts List
![McCulloch TITANIUM 46SD manual cover](/images/sAmxylQDYCQTlMgrDlLHifPY/thumbs/thumb175x175.webp)
To start the McCulloch TITANIUM 46SD, ensure that the fuel tank is filled, the oil level is adequate, and the spark plug is connected. Then, press the primer bulb a few times, pull the starter rope firmly, and the engine should start.
If the lawn mower doesn't start, check the fuel level, ensure the spark plug is clean and connected, and verify that the air filter is not blocked. Also, make sure the engine is not flooded with fuel.
It is recommended to change the oil after the first 5 hours of use and then every 50 hours of operation or at the beginning of each mowing season.
Use unleaded gasoline with a minimum octane rating of 87. Avoid using gasoline with more than 10% ethanol content.
To sharpen the blades, first disconnect the spark plug. Remove the blade by unscrewing the bolt holding it in place, then sharpen using a file or grinder, ensuring the blade is balanced before reinstalling.
Regular maintenance tasks include checking and changing the oil, cleaning or replacing the air filter, inspecting the spark plug, sharpening or replacing the blades, and cleaning the mower deck.
Ensure the blades are sharp, the deck is clean, and the mower is set to the appropriate height for the grass type and condition. Regularly maintain the engine for optimal performance.
Excessive vibration may be caused by unbalanced or damaged blades. Check the blades for damage and ensure they are properly balanced and securely tightened.
To store the lawn mower for winter, drain the fuel tank, change the oil, clean the mower, and store it in a dry, sheltered area. Disconnect the spark plug to prevent accidental starting.
Always wear protective eyewear and sturdy footwear. Ensure the area is clear of debris before mowing and never operate the mower on wet grass to avoid slipping.