McCulloch TITANIUM 46 RSD Spare Parts List
![McCulloch TITANIUM 46 RSD manual cover](/images/bwtJIMzmJqnIiWxNxskFNlRc/thumbs/thumb175x175.webp)
To start the mower, ensure the fuel tank is filled and oil level is adequate. Engage the brake lever, set the throttle to choke, and pull the starter rope briskly. Once the engine starts, adjust the throttle to the desired speed.
Check the fuel level and ensure fresh fuel is used. Verify the spark plug connection and clean or replace it if necessary. Ensure the air filter is clean and the mower is on a flat surface when starting.
Regularly inspect the blade for damage or wear. Sharpen the blade every 25 hours of use or if cutting performance decreases. Ensure the mower is off and disconnect the spark plug before servicing the blade.
Use SAE 30 oil for general conditions. In colder climates, SAE 5W-30 can be used. Always check the oil level before use and change it after every 50 hours of operation or annually.
After each use, ensure the mower is off and cooled down. Use a brush or compressed air to remove grass clippings from the deck and wheels. Wipe the exterior with a damp cloth and mild detergent.
Check for debris or grass buildup under the deck that could cause imbalance. Inspect the blade for damage and ensure it is securely mounted. If vibration persists, consult a professional technician.
Locate the height adjustment lever near the wheel. Move the lever to the desired position, ensuring all wheels are set to the same height for an even cut.
Ensure the blade is sharp and not damaged. Confirm that the cutting height is set evenly on all wheels and that the mower deck is free of obstructions.
Check the air filter every 25 hours of use or annually. Replace it if it is excessively dirty or damaged to ensure optimal engine performance.
Clean the mower thoroughly, empty the fuel tank, and run the engine until it stops. Change the oil, remove the spark plug, and store the mower in a dry, sheltered place. Cover it to protect from dust and moisture.