McCulloch ProMac PM655 ES v2 Spare Parts List
![McCulloch ProMac PM655 ES manual cover](/images/mAdHcxrtjREsNVvNWBBwdAYf/thumbs/thumb175x175.webp)
To start the McCulloch ProMac PM655 ES, ensure the fuel tank is filled and the oil level is adequate. Engage the choke if necessary, hold the safety handle, and pull the starter cord briskly.
Use unleaded gasoline with an octane rating of at least 87. Avoid using gasoline with more than 10% ethanol content to prevent engine damage.
Blades should be sharpened after every 25 hours of use or whenever you notice a decrease in cutting performance.
Use SAE 30 oil for temperatures above 32°F (0°C) and SAE 10W-30 for temperatures below 32°F (0°C).
Check if the spark plug is clean and properly gapped, ensure the air filter is clean, and verify that there is fresh fuel in the tank.
Regularly check and replace the air filter, change the oil every 25 hours, and inspect the spark plug for wear and proper gap. Clean the mower deck and sharpen the blades as needed.
To adjust the cutting height, locate the height adjustment levers on each wheel and select the desired cutting level. Ensure all wheels are set to the same height for an even cut.
Check if the blade is balanced and securely attached. Inspect for any damage or debris causing imbalance. Tighten any loose parts and replace damaged components if necessary.
Ensure the grass is dry before mowing, use the appropriate cutting height, and mow more frequently to avoid cutting excessive lengths of grass. Regularly clean the mower deck to prevent buildup.
Wear protective eyewear and sturdy footwear. Ensure the area is clear of debris and bystanders. Always operate the mower on stable ground and avoid steep slopes.