McCulloch ProMac PM180HCRDA Spare Parts List
![McCulloch ProMac PM180HCRDA manual cover](/images/QmMtUdDTDykuEhuAgTtbchgd/thumbs/thumb175x175.webp)
To start the McCulloch ProMac PM180HCRDA Lawn Mower, ensure the fuel tank is filled and the oil level is adequate. Move the throttle lever to the start position, prime the engine three times, and pull the starter handle briskly.
If the lawn mower does not start, check the fuel level, ensure the spark plug is connected, and the air filter is clean. Also, verify that the throttle lever is in the correct position.
Regular maintenance should be performed every 25 hours of use or at the beginning of each mowing season. This includes checking the oil, cleaning the air filter, and examining the spark plug.
To replace the air filter, remove the cover by unscrewing the fasteners, take out the old filter, and insert a new one. Ensure the new filter is seated properly before replacing the cover.
Use SAE 30 or 10W-30 oil for temperatures above 32°F (0°C) and SAE 5W-30 for colder conditions. Always refer to the user manual for specific recommendations.
To sharpen the blade, disconnect the spark plug, remove the blade, and use a file or grinder to sharpen it. Ensure the blade is balanced before reattaching it to the mower.
The recommended tire pressure for the McCulloch ProMac PM180HCRDA is 20 PSI. Check the tire sidewall or user manual for specific information.
Uneven cutting can be caused by a dull blade, incorrect tire pressure, or incorrect mowing height. Check and address these areas to resolve the issue.
It is recommended to use unleaded gasoline with a maximum of 10% ethanol content. Avoid using fuels with higher ethanol concentrations to prevent engine damage.
For off-season storage, drain the fuel tank, clean the mower thoroughly, and store it in a dry place. It is also advisable to remove the battery if applicable.