McCulloch MI145HCRDE Spare Parts List
![McCulloch MI145HCRDE manual cover](/images/faLvwMdCZcOlVFSxfRHnDKWD/thumbs/thumb175x175.webp)
To start the McCulloch MI145HCRDE, ensure the mower is on a flat surface, the blade control is disengaged, and the fuel valve is open. Then, turn the ignition key to the start position until the engine starts.
Check the fuel level, ensure the battery is charged, inspect the spark plug for damage, and verify that the air filter is clean. If the problem persists, consult the manual or contact customer service.
Adjust the cutting height by using the levers located near each wheel. Move the levers to the desired position to raise or lower the mower deck.
Change the oil after the first 5 hours of use, and then every 50 hours of operation or once per season. Always use the recommended oil type specified in the user manual.
Regular maintenance tasks include checking and replacing the oil, air filter, and spark plug; sharpening the blades; and cleaning the mower deck to prevent grass buildup.
Ensure the mower deck is level, check the tire pressure, and inspect the blades for sharpness or damage. Replace or sharpen blades if necessary.
It is not recommended to mow wet grass as it can lead to clogging, uneven cutting, and potential damage to the mower. Wait until the grass is dry for optimal results.
Clean the mower thoroughly, remove any fuel from the tank, disconnect the battery, and store it in a dry, protected area away from direct sunlight.
Wear protective clothing, keep bystanders away, never operate the mower in an enclosed area, and always turn off the engine before making adjustments or cleaning.
Ensure the mower is off and the spark plug is disconnected. Tilt the mower to access the blade, use a wrench to remove the blade bolt, replace the blade, and tighten the bolt securely.