McCulloch MI11CRDC Spare Parts List
![McCulloch MI11CRDC manual cover](/images/pmguZpjUemJqNTcLxAGFNqLx/thumbs/thumb175x175.webp)
To start the McCulloch MI11CRDC Lawn Mower, ensure that the mower is on a flat surface. Press the primer bulb three times, engage the safety lever, and then pull the starter cord firmly.
If the mower doesn't start, check the fuel level and make sure it's fresh. Verify that the spark plug is clean and properly connected. Also, ensure that the air filter is clean and not clogged.
It is recommended to change the oil every 25 hours of use or at the beginning of each mowing season. Always use the oil type specified in the user manual.
Ensure the blade is sharp and balanced. Check the cutting height and adjust it according to your lawn type. Regularly clean the underside of the mower deck to prevent grass buildup.
Before storing the mower for winter, clean the mower deck, change the oil, and add a fuel stabilizer to the tank. Store the mower in a dry place and remove the spark plug to prevent corrosion.
To replace the blade, disconnect the spark plug for safety. Tilt the mower onto its side, use a wrench to remove the blade bolt, and install the new blade. Ensure that the new blade is securely fastened.
Excessive vibration may be caused by an unbalanced or damaged blade. Check the blade for damage and balance it if necessary. Tighten any loose bolts or nuts on the mower.
The cutting height can be adjusted using the height adjustment levers located on each wheel. Move the lever to the desired position to set the cutting height. Ensure all wheels are set to the same height for an even cut.
Use unleaded gasoline with a minimum octane rating of 87. Avoid using gasoline with more than 10% ethanol content as it can damage the engine.
To clean the air filter, remove the air filter cover and take out the filter. Wash it with warm, soapy water and let it dry completely. Reinstall the filter and secure the cover.