McCulloch MC1136 Spare Parts List
![McCulloch MC1136 manual cover](/images/oEnpxOcdLRfjVZZyVzXnvtjj/thumbs/thumb175x175.webp)
To start the McCulloch MC1136 Lawn Mower, ensure the fuel tank is filled, the oil level is adequate, and the spark plug is connected. Pull the starter handle briskly until the engine starts.
The McCulloch MC1136 Lawn Mower is designed to run on unleaded gasoline with an octane rating of 87 or higher. Avoid using ethanol blends greater than 10%.
Change the oil in your McCulloch MC1136 Lawn Mower after the first 5 hours of operation, then every 50 hours or annually, whichever comes first.
If the lawn mower doesn't start, check the fuel level, ensure the spark plug is connected, and inspect the air filter. Clean or replace the air filter if necessary.
To improve cutting performance, ensure the blade is sharp and balanced, adjust the cutting height appropriately, and mow when the grass is dry.
During the off-season, drain the fuel tank, clean the mower thoroughly, check and sharpen the blade, and store it in a dry, sheltered location.
To replace the spark plug, disconnect the spark plug wire, use a spark plug socket to remove the old plug, and install a new one with the correct gap. Reconnect the spark plug wire.
Excessive vibration may be caused by a damaged blade or loose parts. Inspect the blade for damage and ensure all bolts and nuts are tight.
To clean the air filter, remove the cover, take out the filter, and gently clean it with warm soapy water. Rinse thoroughly and let it dry before reinstalling.
Adjust the cutting height by using the height adjustment lever located near the mower wheels. Set the lever to the desired cutting height position.