McCulloch M6553CMD Spare Parts List
![McCulloch M6553CMD manual cover](/images/yPZMIkKTYFDFBvGKRfhiQOhZ/thumbs/thumb175x175.webp)
To start the McCulloch M6553CMD lawn mower, ensure the mower is on a flat surface, the fuel valve is open, and the throttle is set to 'Start'. Pull the starter cord firmly until the engine fires up.
Check the fuel level, ensure the fuel is fresh, and inspect the spark plug for wear or damage. Additionally, verify that the air filter is clean and that the spark plug wire is securely connected.
It is recommended to change the oil after the first 5 hours of use, and then every 25 hours of operation or at least once per mowing season.
Use SAE 30 oil for temperatures above 32°F (0°C) and SAE 10W-30 for temperatures below 32°F. Always check the owner’s manual for specific oil recommendations.
Ensure the blade is sharp and not damaged. Regularly clean the underside of the deck to prevent grass buildup and adjust the cutting height according to lawn conditions.
After each use, safely tip the mower to its side and use a garden hose to rinse away grass clippings. Ensure the mower is off and the spark plug wire is disconnected before cleaning.
Drain the fuel tank or add a fuel stabilizer, change the oil, remove and clean the spark plug, and store the mower in a dry place. Disconnect the battery if applicable.
Excessive vibration may be due to an unbalanced blade, loose parts, or debris lodged in the cutting deck. Inspect and correct these issues as necessary.
To adjust the cutting height, use the lever located near the wheels to raise or lower the deck to the desired height setting. Make sure to adjust all wheels evenly.
Regularly check and change the oil, inspect and clean the air filter, sharpen or replace the blade as needed, and check tire pressure. Also, inspect all cables and connections for wear and tear.