McCulloch M56-675DWA Spare Parts List
![McCulloch M56-675DWA manual cover](/images/BMiwcdSHErzofHQzkaKCyfWM/thumbs/thumb175x175.webp)
To start the McCulloch M56-675DWA lawn mower, ensure that the fuel tank is filled and the oil level is adequate. Set the throttle to the 'choke' position if the engine is cold. Pull the starter rope firmly until the engine fires, then move the throttle to the 'run' position.
The McCulloch M56-675DWA lawn mower is designed to run on regular unleaded gasoline with a minimum octane rating of 87. Avoid using gasoline with more than 10% ethanol content.
It is recommended to change the oil in your McCulloch M56-675DWA lawn mower after the first 5 hours of use, and then after every 25 hours of operation or at the start of each mowing season.
If your McCulloch M56-675DWA mower is not starting, check the fuel level and ensure the fuel is fresh. Verify that the spark plug is clean and properly connected. Additionally, inspect the air filter for cleanliness and ensure the throttle is set correctly.
To adjust the cutting height on the McCulloch M56-675DWA, locate the height adjustment levers on each wheel. Move the levers to the desired position, ensuring all wheels are set to the same height for an even cut.
Regular maintenance such as changing the oil, cleaning or replacing the air filter, sharpening the blade, and checking the spark plug will prolong the life of your McCulloch M56-675DWA lawn mower. Additionally, storing it in a dry, sheltered place and cleaning the deck after each use is beneficial.
To sharpen the blade on your McCulloch M56-675DWA mower, disconnect the spark plug wire, tilt the mower to access the blade, and use a wrench to remove the blade. Sharpen the blade using a file or a sharpening tool, ensuring the angle of the edge is maintained. Reattach the blade securely before use.
The recommended spark plug for the McCulloch M56-675DWA lawn mower is an NGK BPMR7A or equivalent. Always check the gap before installation, which should be set to 0.7-0.8 mm.
To improve performance in thick grass, ensure the mower blade is sharp and set the cutting height higher for the first pass. Mow at a slower pace to allow the mower to handle the dense grass effectively.
Excessive vibration in the McCulloch M56-675DWA may be due to an unbalanced or damaged blade. Check the blade for damage and balance it if necessary. Additionally, inspect for any loose parts or debris caught in the mower deck.