McCulloch M56-675CMD Spare Parts List

Pages 5

Year 2008

Language(s)

of 5

McCulloch M56-675CMD Specification

The McCulloch M56-675CMD is a robust and efficient petrol lawn mower designed for medium to large-sized gardens. It features a powerful Briggs & Stratton 675e Series engine, which delivers reliable performance and easy starting. The mower's cutting width is 56 cm, allowing for efficient coverage of large areas, reducing the time and effort required to maintain a pristine lawn.

The M56-675CMD comes equipped with a 3-in-1 cutting system, offering versatility in grass management. It provides options for rear discharge, mulching, or grass collection, allowing users to choose the most suitable method for their lawn's needs. The cutting height is adjustable across five different positions, ranging from 30 mm to 90 mm, enabling precise control over grass length for a manicured finish.

This lawn mower is designed with user convenience in mind. Its robust steel deck ensures durability and longevity, even under demanding conditions. The large rear wheels provide enhanced maneuverability, offering smooth operation on uneven or sloped terrain. Additionally, the ergonomic handlebar is adjustable, ensuring comfortable use for operators of varying heights, while the soft grip reduces hand fatigue during extended mowing sessions.

The McCulloch M56-675CMD is equipped with a large 62-liter grass collector, minimizing the need for frequent emptying and enhancing mowing efficiency. It also features a wash port, making it easy to clean the cutting deck, thus maintaining optimal performance and prolonging the machine's lifespan. Overall, the McCulloch M56-675CMD is a versatile, high-performance lawn mower, offering durability, comfort, and efficiency for homeowners seeking a reliable solution for lawn maintenance.

McCulloch M56-675CMD F.A.Q.

How do I start the McCulloch M56-675CMD Lawn Mower?

To start the mower, ensure the fuel tank is filled, the oil level is adequate, and the spark plug is connected. Pull the starter cord firmly while holding the safety lever against the handle.

What should I do if the mower doesn't start?

Check the fuel level, ensure the spark plug is clean and properly connected, and verify there is no blockage in the air filter. If it still doesn't start, consult the manual or seek professional assistance.

How do I maintain the blade of the McCulloch M56-675CMD Lawn Mower?

Regularly check the blade for sharpness and damage. Sharpen the blade every 20-25 hours of use or at the start of each season. Always disconnect the spark plug before performing any maintenance.

What type of fuel should I use for the McCulloch M56-675CMD Lawn Mower?

Use unleaded gasoline with a minimum octane rating of 87. Avoid using gasoline with more than 10% ethanol content.

How often should I change the oil in the McCulloch M56-675CMD Lawn Mower?

Change the oil after the first 5 hours of use, then every 25 hours or at the start of each mowing season. Use SAE 30 oil for optimal performance.

How do I adjust the cutting height on the McCulloch M56-675CMD Lawn Mower?

Adjust the cutting height using the lever located near each wheel. Move the lever to raise or lower the deck to the desired height.

What should I do if the mower vibrates excessively during use?

Excessive vibration may indicate a damaged or unbalanced blade. Inspect the blade for damage and ensure it is securely fastened. Replace or balance the blade if necessary.

How can I clean the McCulloch M56-675CMD Lawn Mower after use?

After use, let the mower cool down. Use a brush to remove grass clippings from the deck and a damp cloth to wipe down the exterior. Avoid using water directly on the engine.

What is the recommended storage procedure for the mower during the off-season?

Before storage, clean the mower thoroughly, change the oil, and empty the fuel tank. Store in a dry, sheltered area. Consider using a fuel stabilizer if fuel will be left in the tank.

How do I replace the air filter on the McCulloch M56-675CMD Lawn Mower?

To replace the air filter, remove the cover by unscrewing or unclipping it, take out the old filter, and insert the new one. Ensure it is seated properly before reattaching the cover.