McCulloch M56-190DWA Spare Parts List
![McCulloch M56-190DWA manual cover](/images/ETqCbLYRSYoNJlziZjRJIfeu/thumbs/thumb175x175.webp)
To start the McCulloch M56-190DWA, ensure the fuel tank is filled and the oil level is adequate. Prime the engine by pressing the primer bulb three times, then pull the starter handle firmly.
Check for fuel and oil levels, ensure the spark plug is clean and properly connected, and inspect the air filter for blockages. Replace any faulty components if necessary.
Change the oil after every 25 hours of operation or at the beginning of each mowing season, whichever comes first.
Regularly inspect the blades for sharpness and damage. Sharpen the blades at least once a mowing season or more frequently if needed. Replace blades that are bent or excessively worn.
Locate the height adjustment lever on each wheel and set them to the desired cutting height, ensuring all wheels are set to the same level for an even cut.
Check for any debris caught in the blades or under the deck. Inspect the blade for damage or imbalance and tighten any loose parts on the mower.
Ensure the mower is turned off and disconnect the spark plug. Use a brush or hose to remove grass clippings and debris from the deck and blades. Avoid using excessive water on the engine.
Use unleaded gasoline with an octane rating of 87 or higher. Avoid using gasoline with more than 10% ethanol content.
Empty the fuel tank or add a fuel stabilizer. Clean the mower thoroughly, and store it in a dry, covered area. Disconnect the spark plug to prevent accidental starting.
Check that all wheels are set to the same height and that the blade is sharp and balanced. Inspect for any obstructions on the deck that may affect performance.