McCulloch M553CME Spare Parts List
![McCulloch M553CME manual cover](/images/lFlYzVjoIhCMaRtUoIbORjFB/thumbs/thumb175x175.webp)
To start the McCulloch M553CME Lawn Mower, ensure the mower is on a flat surface. Press the primer bulb three times if the engine is cold, pull the start handle gently until resistance is felt, then pull swiftly.
If the lawn mower doesn't start, check the fuel level and make sure the fuel is fresh. Inspect the spark plug for any dirt or damage, and ensure the air filter is clean.
It is recommended to change the oil after the first five hours of use, then every 25 hours of operation or at the start of each mowing season.
Use SAE 30 oil for the McCulloch M553CME in temperatures above 40°F (4°C). For temperatures below this, use SAE 10W-30.
To clean the mower, ensure it is turned off and cool. Use a garden hose to wash away grass clippings under the deck. Avoid getting water on the engine and other electrical components.
The cutting height can be adjusted using the lever located near each wheel. Move the lever to the desired height setting, ensuring all four wheels are set to the same level.
Excessive vibration may be caused by a damaged or unbalanced blade. Inspect the blade for damage and ensure it is securely attached. Replace or balance the blade if necessary.
For off-season storage, drain the fuel or add a fuel stabilizer. Clean the mower thoroughly, change the oil, and remove the spark plug. Store it in a dry, covered area.
Check the air filter every 25 hours of use. Clean it by tapping it gently to remove dust or replace it if it’s excessively dirty or damaged.
To replace the spark plug, disconnect the spark plug wire and remove the old plug using a spark plug wrench. Install a new plug with the correct gap, and reconnect the wire.