McCulloch M53–875 CD Alu Spare Parts List
![McCulloch M53–875 CD Alu manual cover](/images/PfkGjMNpbfpWUgmmPNHzhhLZ/thumbs/thumb175x175.webp)
To start the McCulloch M53–875 CD Alu Lawn Mower, ensure the fuel tank is filled, set the throttle to the 'Start' position, pull the starter cord firmly, and the engine should start.
Use unleaded gasoline with a minimum octane rating of 87 for optimal performance of the McCulloch M53–875 CD Alu Lawn Mower.
Change the oil after the first 5 hours of use, and then every 50 hours of operation or once a season.
Check the blade for damage and sharpness every 25 hours of use. Sharpen or replace the blade as needed to ensure clean cutting.
If the mower doesn't start, check the fuel level, ensure the spark plug is connected, and verify that the air filter is clean. If it still doesn’t start, inspect the spark plug for wear.
Excessive vibration can be caused by a damaged blade or loose parts. Check the blade for balance and damage, and tighten any loose components.
After use, remove grass clippings and debris from the deck and blades using a brush or compressed air. Never use water to clean the mower, as moisture can damage the engine.
To store the mower during the off-season, drain the fuel tank, remove the battery (if applicable), clean the mower thoroughly, and store it in a dry place.
To adjust the cutting height, use the lever located on each wheel to set the desired height. Make sure all wheels are set to the same level for an even cut.
If the self-propulsion is not working, check the drive cable for tension or damage, and inspect the drive belt for wear. Adjust or replace parts as necessary.