McCulloch M53-625CMD Spare Parts List
![McCulloch M53-625CMD manual cover](/images/recHhHfQsUtdNuluZUqdZbxZ/thumbs/thumb175x175.webp)
To start the McCulloch M53-625CMD, ensure the mower is on a flat surface. Press the primer bulb 3 times, pull the throttle lever to the 'start' position, and pull the starter rope firmly.
Use unleaded gasoline with a minimum octane rating of 87. Avoid using ethanol blends greater than 10%.
Check the fuel level, inspect the spark plug for wear, ensure the air filter is clean, and verify that the safety handle is fully pressed.
Change the oil after the first 5 hours of use, then every 25 hours or at the start of each mowing season.
Use SAE 30 oil for temperatures above 32°F (0°C) and SAE 10W-30 for temperatures below 32°F (0°C).
Ensure the engine is off and the spark plug is disconnected. Use a brush or hose to remove grass clippings and debris from the cutting deck.
Check if the blade is damaged or unbalanced. Tighten any loose parts and ensure the blade is properly aligned.
Regularly sharpen the blade, maintain correct tire pressure, and mow when the grass is dry to ensure optimal cutting performance.
Ensure the cutting height is set evenly on all wheels, check that the blade is sharp, and reduce mowing speed if necessary.
Clean the mower thoroughly, drain the fuel tank, change the oil, remove the spark plug, and store it in a dry place to prevent rust.