McCulloch M53-190WFX Spare Parts List

To start the McCulloch M53-190WFX, ensure the fuel tank is filled, the oil level is adequate, and the spark plug is connected. Pull back the safety handle, then pull the starter cord briskly.
Use SAE 30 oil for temperatures above 32°F (0°C) and 10W-30 for colder conditions. Always refer to the user manual for specific recommendations.
Sharpen the blades at least once per mowing season or more often if the grass appears frayed after mowing.
Check for fuel, ensure the spark plug is connected, and inspect the air filter. If these are fine, consult a professional for possible carburetor or ignition issues.
Adjust the cutting height using the levers located on each wheel. Move the levers to the desired position to raise or lower the cutting height.
Drain the fuel tank, change the oil, clean the deck, and remove the spark plug. Store in a dry place and check the condition of the blades before next use.
After mowing, disconnect the spark plug, tilt the mower, and use a brush or hose to remove grass clippings from the deck and blades.
It's not recommended to mow wet grass as it can lead to clumping and clogging. Wait until the grass is dry for optimal performance.
Check for debris under the deck, inspect the blade for damage, and ensure all bolts are tightened. If vibration persists, seek professional service.
To replace the spark plug, first disconnect the spark plug wire, remove the old plug with a wrench, and install a new one, ensuring it's properly gapped.