McCulloch M53-160CMDW Spare Parts List
![McCulloch M53-160CMDW manual cover](/images/pGUEjIUtSuMuJePQKetlSFOc/thumbs/thumb175x175.webp)
To start the McCulloch M53-160CMDW, ensure the fuel tank is filled, the spark plug is connected, and the oil level is adequate. Pull the starter rope firmly while holding the safety lever against the handle.
Use unleaded gasoline with a minimum octane rating of 87. Avoid using ethanol blends higher than 10% to prevent engine damage.
Change the oil after the first 5 hours of use, then every 25 hours of operation or at the beginning of each mowing season, whichever comes first.
Check the blade for sharpness and balance. Ensure the wheels are set at the same height. Clean the underside of the mower deck to remove any grass buildup.
Always turn off the mower and disconnect the spark plug. Tilt the mower on its side with the air filter facing up and use a hose or scraper to remove grass clippings and debris from the deck.
Clean the mower, change the oil, empty the fuel tank, check and clean the air filter, and inspect the spark plug. Store the mower in a dry, covered area.
Adjust the cutting height settings to avoid scalping, and consider using high-wheel settings to improve traction and maneuverability on uneven ground.
The engine may stall due to a clogged air filter, stale fuel, or a dirty carburetor. Check and clean the air filter, replace old fuel, and clean the carburetor if necessary.
Disconnect the spark plug, then tilt the mower and use a wrench to remove the blade bolt. Replace the old blade with a new one, ensuring it is correctly aligned, and tighten the bolt securely.
Always wear appropriate safety gear, such as goggles and gloves. Ensure the area is clear of debris, keep bystanders at a safe distance, and never refuel the mower when it’s hot or running.