McCulloch M5145HW TITANIUM Spare Parts List

To start the McCulloch M5145HW TITANIUM, ensure the fuel tank is filled, the oil level is adequate, and the spark plug is connected. Pull the starter handle firmly while holding down the safety lever.
Use unleaded gasoline with an octane rating of 87 or higher. Avoid using fuel with more than 10% ethanol content.
Change the oil after the first 5 hours of use, then every 25 hours of operation or at the start of each mowing season.
Check the fuel level, ensure the spark plug is connected and clean, verify the air filter is not clogged, and make sure the safety lever is engaged.
Remove the spark plug wire for safety, tilt the mower to access the deck, and use a hose to wash away any grass clippings or debris. Scrape off any stubborn residue with a plastic scraper.
Drain the fuel tank, change the oil, clean the mower thoroughly, inspect the blade for damage, and store it in a dry place.
Disconnect the spark plug, remove the blade using the appropriate wrench, and sharpen it with a bench grinder or file. Ensure the blade is balanced before reinstalling.
Refer to the user manual for the recommended tire pressure, typically around 20 psi for most models.
Locate the height adjustment lever on each wheel. Move the levers to the desired height setting uniformly across all wheels for an even cut.
Wear appropriate footwear and eye protection, clear the lawn of debris before mowing, never refuel a hot engine, and keep children and pets at a safe distance.