McCulloch M51-675 CDW Spare Parts List

To start the McCulloch M51-675 CDW Lawn Mower, prime the engine by pressing the primer bulb three times. Pull the starter rope handle gently until resistance is felt, then pull sharply to start the engine.
If the engine does not start, check the fuel level and ensure fresh gasoline is used. Check the spark plug for fouling and clean or replace if necessary. Verify the air filter is clean and not obstructed.
To adjust the cutting height, locate the height adjustment levers on each wheel. Move the levers to the desired height position, ensuring all wheels are set to the same level for an even cut.
Regular maintenance includes checking and changing the oil, cleaning or replacing the air filter, and inspecting the spark plug. Refer to the user manual for detailed maintenance schedules and procedures.
Uneven cutting can be caused by a dull blade, incorrect cutting height, or uneven terrain. Sharpen or replace the blade as needed, ensure all wheels are set to the same height, and mow on level ground.
Excessive vibration may indicate a damaged or unbalanced blade. Check the blade for damage and ensure it is properly installed. Balance or replace the blade if necessary.
It is recommended to change the oil after the first 5 hours of use and then every 25 hours or at the start of each mowing season. Refer to the user manual for specific oil type and change instructions.
It is not advisable to mow wet grass as it can lead to clogging under the deck, uneven cutting, and potential damage to the lawn. Wait until the grass is dry for optimal results.
After use, disconnect the spark plug wire and use a garden hose to rinse grass clippings and debris from the mower deck. Dry thoroughly and store in a dry place to prevent rust.
Always wear appropriate protective gear, such as gloves and safety glasses. Ensure children and pets are at a safe distance. Never refuel the mower while it is running or hot. Follow all safety guidelines in the user manual.