McCulloch M51-501CMD Spare Parts List

To start the McCulloch M51-501CMD Lawn Mower, first ensure that the fuel tank is filled and the oil level is correct. Engage the safety lever, then pull the starter cord firmly until the engine starts.
If the lawn mower won't start, check if there is fuel in the tank and if the spark plug is clean and properly connected. Ensure that the air filter is clean and that the safety lever is engaged.
It is recommended to change the oil after the first 5 hours of use and then every 50 hours of operation or at the beginning of each mowing season.
The McCulloch M51-501CMD Lawn Mower is designed to run on unleaded petrol with a minimum octane rating of 87.
To adjust the cutting height, locate the height adjustment lever on each wheel and move it to the desired position. Make sure all wheels are set to the same height for an even cut.
Before storing the mower for winter, clean the mower deck, change the oil, empty the fuel tank or add a fuel stabilizer, and remove the spark plug. Store the mower in a dry, secure place.
To clean the mower deck, ensure the mower is off and disconnect the spark plug. Tilt the mower to access the deck, and use a brush or hose to remove grass clippings and debris.
If the mower is vibrating excessively, check for debris stuck in the blade area, ensure the blade is balanced and not bent, and inspect the engine mounting bolts for tightness.
To sharpen the blades, remove the spark plug, then detach the blade from the mower. Use a file or grinder to sharpen the edge evenly, and ensure the blade is balanced before reattaching it.
If the lawn mower is not cutting evenly, check that all wheels are set to the same height, the blade is sharp and balanced, and the tire pressure is even.