McCulloch M51–150WRPX Spare Parts List
![McCulloch M51–150WRPX manual cover](/images/ZxnkKxUGwGSsxoDkIKLFgUuI/thumbs/thumb175x175.webp)
To start the McCulloch M51–150WRPX Lawn Mower, first ensure that the fuel tank is filled and the oil is at the correct level. Pull the safety handle towards the handlebar, then firmly pull the starter cord.
Check the fuel level, make sure the spark plug is connected properly, and ensure the air filter is clean. Also, confirm that the safety handle is engaged while pulling the starter cord.
It is recommended to change the oil after every 25 hours of operation or at least once per mowing season to maintain optimal performance.
Use clean, fresh unleaded gasoline with an octane rating of 87 or higher. Avoid using fuel with more than 10% ethanol.
Allow the mower to cool down, then use a brush or cloth to remove grass clippings and debris. Avoid using water directly on the engine to prevent damage.
To adjust the cutting height, locate the height adjustment lever on each wheel and move it to the desired position. Ensure all wheels are set to the same height for an even cut.
Inspect the blade for dullness or damage. Sharpen or replace the blade as necessary, ensuring it is balanced and securely attached.
Clean the mower thoroughly, drain the fuel tank, and change the oil. Store it in a dry, sheltered area to prevent rust and corrosion.
Regularly check and replace the air filter, change the oil, inspect the spark plug, and ensure the blade is sharp. Also, clean the mower after each use.
Excessive vibration can be caused by an unbalanced blade, loose parts, or engine issues. Check the blade for balance and tightness, and ensure all bolts are secure.