McCulloch M51–110M CLASSIC Spare Parts List
![McCulloch M51–110M CLASSIC manual cover](/images/RjDSKgdEZFxrYfTehusuAdVr/thumbs/thumb175x175.webp)
To start the McCulloch M51–110M CLASSIC Lawn Mower, ensure the spark plug is connected, the fuel tank is filled, and the oil level is correct. Pull the starter rope firmly until the engine fires.
Check the fuel level, spark plug connection, and ensure the air filter is clean. Also, inspect the oil level and replace old fuel with fresh gasoline.
Regularly check the blade for any signs of damage or dullness. Sharpen the blade every 25 hours of use or as needed. Always disconnect the spark plug before performing maintenance.
The McCulloch M51–110M CLASSIC Lawn Mower typically requires SAE 30 oil for optimal performance in warmer temperatures.
Change the oil after the first 5 hours of use, then every 25-50 hours of operation or at least once per mowing season.
Excessive vibration may be caused by an unbalanced blade, loose parts, or debris caught in the mower. Check the blade balance, tighten any loose components, and clear debris.
After use, remove grass clippings and debris from the mower deck and wheels. Use a brush or cloth for cleaning, and avoid using water directly on the engine.
Clean the mower thoroughly, change the oil, empty the fuel tank or add a fuel stabilizer, and store it in a dry, sheltered place. Disconnect the spark plug to prevent accidental starts.
To adjust the cutting height, locate the height adjustment lever near each wheel. Move the lever to the desired position to raise or lower the cutting height of the mower.
Ensure the blade is sharp and properly installed. Check that the mower deck is clean to allow for optimal airflow and cutting performance. Adjust the cutting height if necessary.