McCulloch M46–550 CMDA Spare Parts List

To start the McCulloch M46-550 CMDA lawn mower, ensure the fuel tank is filled and the oil level is adequate. Engage the safety lever, then pull the starter cord firmly.
Use unleaded gasoline with an octane rating of 87 or higher. Avoid using ethanol blends over 10% to prevent engine issues.
Check the fuel level, spark plug condition, and ensure the air filter is not clogged. Also, verify that the safety lever is engaged properly.
Change the oil after the first 5 hours of use and then every 25 hours of operation or at the beginning of each mowing season.
Disconnect the spark plug, tilt the mower, and use a brush or hose to remove grass clippings and debris. Dry thoroughly to prevent rust.
The cutting height can be adjusted using the levers located on each wheel. Move the lever to the desired height setting.
Check for any loose bolts or parts. Inspect the blade for damage or imbalance and replace if necessary.
Drain the fuel tank, clean the mower, and store it in a dry, cool place. Cover it to prevent dust accumulation.
Regularly check and replace the spark plug, air filter, and oil. Sharpen the blade and ensure all nuts and bolts are tight.
Ensure the blade is sharp and balanced, use fresh fuel, and perform regular maintenance checks to keep the engine running smoothly.