McCulloch M46-500 CD Spare Parts List
![McCulloch M46-500 CD manual cover](/images/tYrujBweTaGnMeeajEBPYGJD/thumbs/thumb175x175.webp)
To start the McCulloch M46-500 CD, ensure the fuel tank is filled, the oil level is adequate, and the spark plug is connected. Pull the starter handle firmly while holding the safety lever.
Check the fuel level, ensure the spark plug is clean and connected, and verify the air filter is not clogged. Also, ensure the safety lever is being held when pulling the starter.
Change the oil after the first 5 hours of use, then every 25 hours of operation or at the beginning of each mowing season.
Use SAE 30 oil for optimal performance. In colder climates, 10W-30 can be used.
Adjust the cutting height by using the lever located near each wheel. There are multiple height settings to choose from, allowing for precise control over grass length.
Check for debris caught in the blades, ensure the blade is not bent, and verify all nuts and bolts are tightened. Excessive vibration can also indicate a need for blade balancing.
Regularly inspect the blade for damage or dullness. Sharpen it as needed and replace if signs of wear are evident. Always disconnect the spark plug before performing blade maintenance.
Clean the mower thoroughly, drain the fuel tank, change the oil, and store it in a dry, sheltered place. Consider removing the battery if applicable and disconnecting the spark plug.
Regular maintenance is key. Ensure the blade is sharp, the engine is running smoothly, and the mower deck is clean. Adjust the cutting height appropriately for the grass type and conditions.
Check the drive belt for wear or damage, ensure the drive cable is properly connected and adjusted, and verify that the wheels are not obstructed.