McCulloch M46–125WR Spare Parts List
![McCulloch M46–125WR manual cover](/images/EJVmIoJsRydeqhUXsDxWKGng/thumbs/thumb175x175.webp)
To start the McCulloch M46–125WR, ensure the fuel tank is filled, set the throttle to the start position, and pull the starter cord firmly.
Check the fuel level, ensure the spark plug is connected, and inspect the air filter for any blockages. Also, make sure the choke lever is in the correct position.
The cutting height can be adjusted by using the height adjustment lever located near the wheel. Set it to the desired height position.
Use SAE 30 oil for the McCulloch M46–125WR lawn mower. Refer to the user manual for specific oil capacity and change intervals.
Sharpen the blade at the beginning of each mowing season and as needed throughout the year if you notice uneven cutting or tearing of the grass.
Excessive vibration may indicate a damaged blade or loose parts. Check for debris under the deck and ensure all bolts and nuts are tightened.
Use a garden hose to remove grass clippings and debris from the deck. Avoid spraying water directly into the engine. Wipe down the exterior with a clean cloth.
It is recommended to use unleaded gasoline with a maximum of 10% ethanol content to prevent engine damage.
For winter storage, drain the fuel tank, remove the spark plug, and apply a few drops of oil into the cylinder. Store the mower in a dry, covered area.
To replace the air filter, remove the cover, take out the old filter, and insert a new one. Make sure the filter is properly seated before securing the cover.