McCulloch M46–125R Spare Parts List

To start the McCulloch M46–125R Lawn Mower, ensure that the fuel tank is filled and the oil level is adequate. Pull the throttle lever to the "Start" position, then pull the starter rope firmly.
Use unleaded gasoline with an octane rating of 87 or higher for the McCulloch M46–125R Lawn Mower. Avoid using diesel or ethanol blends over 10%.
Regularly inspect the blade for wear and damage. Sharpen the blade if it becomes dull, and replace it if it is bent or cracked. Always disconnect the spark plug before performing maintenance.
Check the fuel level, ensure the spark plug is connected, and inspect the air filter for clogs. If issues persist, consider replacing the spark plug or contacting a service professional.
Change the oil after the first 5 hours of use, and then every 25 hours of operation or at the beginning of each mowing season. Use SAE 30 oil for optimal performance.
Turn off the lawn mower and disconnect the spark plug. Use a garden hose to wash away grass clippings and debris, and ensure the underside is clear. Dry the mower thoroughly before storage.
To adjust the cutting height, locate the height adjustment lever on each wheel. Move the lever to the desired height position, ensuring all wheels are set to the same level.
Excessive vibration may be caused by a damaged or unbalanced blade. Inspect the blade for damage and ensure it is securely fastened. Balance the blade if necessary or replace it if damaged.
Before storing, run the engine until it runs out of fuel. Change the oil and clean the mower thoroughly. Store in a dry, sheltered area and disconnect the spark plug to prevent accidental starting.
Wear protective eyewear and sturdy footwear. Keep hands and feet away from the cutting area. Never mow in wet conditions, and be cautious of debris that could be thrown by the mower.