McCulloch M46-125 WR Spare Parts List
![McCulloch M46-125 WR manual cover](/images/YoHWuNKNmPRryrqGulDbhUIr/thumbs/thumb175x175.webp)
To start the McCulloch M46-125 WR Lawn Mower, ensure the spark plug is connected, the fuel tank is filled, and the oil level is adequate. Pull the starter handle gently until you feel resistance, then pull firmly and briskly.
Use SAE 30 oil for temperatures above 32°F (0°C) and 10W-30 for varied temperature ranges. Always check the manual for specific recommendations.
Disconnect the spark plug, tilt the mower to its side, and use a brush or hose to remove grass clippings and debris. Ensure the mower is dry before storing it.
Blades should be sharpened after every 25 hours of use or at the start of each mowing season to maintain optimal cutting performance.
Check for a clogged air filter, dirty spark plug, or stale fuel. Ensure the fuel valve is open and inspect for any disconnected wiring.
Disconnect the spark plug wire, use a spark plug wrench to remove the old plug, and replace it with a new one. Ensure it is tightened securely before reconnecting the wire.
Clean the mower thoroughly, drain the fuel tank, and remove the spark plug. Store in a dry, sheltered location to protect it from the elements.
Regularly sharpen the blades, maintain correct tire pressure, and ensure the engine is tuned and well-maintained for optimal performance.
Check for debris lodged in the blades or unevenly worn blades. Inspect the mower for loose parts and tighten as necessary.
Locate the height adjustment lever, typically on each wheel or centrally located. Move the lever to the desired cutting height position.