McCulloch M46-110 R CLASSIC Spare Parts List
![McCulloch M46-110 R CLASSIC manual cover](/images/gLnjPQeDcHdcpdkSkLGQxKdd/thumbs/thumb175x175.webp)
To start the McCulloch M46-110 R CLASSIC Lawn Mower, ensure the fuel tank is filled and the oil level is adequate. Pull the choke lever, if needed, and hold down the safety lever while pulling the starter rope briskly.
If the lawn mower does not start, check for fuel and oil levels first. Ensure the spark plug is functional and clean. Verify that the air filter is not clogged and the fuel is fresh.
To adjust the cutting height on the McCulloch M46-110 R CLASSIC, locate the height adjustment lever near the wheels. Move the lever to the desired height setting, ensuring all wheels are set equally for an even cut.
Regular maintenance includes checking and replacing the oil, cleaning or replacing the air filter, inspecting the spark plug, and sharpening the blades. It's also important to clean the mower deck after each use.
To sharpen the blades, disconnect the spark plug wire for safety, tilt the mower carefully, and remove the blade. Use a file or a grinder to sharpen the blade evenly, then balance it before reattaching.
Use unleaded gasoline with a minimum octane rating of 87. Avoid using ethanol blends higher than 10% as they may damage the engine.
Check if the wheels are set to the same height and ensure the blade is sharp and balanced. Inspect the mower deck for obstructions and clean it thoroughly.
Excessive vibration can be caused by an unbalanced or damaged blade. Check the blade for damage and ensure it is properly balanced. Tighten any loose parts and inspect the engine mountings.
To winterize the mower, run the engine until it is out of fuel, or add a fuel stabilizer to a full tank. Change the oil, clean the air filter, and remove the battery if applicable. Store in a dry place.
After ensuring the mower is off and cooled, use a garden hose to rinse grass clippings and debris from under the deck. For thorough cleaning, you may need to scrub with a brush.