McCulloch M400 Exclusive Spare Parts List
![McCulloch M400 Exclusive manual cover](/images/dvnTITlUdwRsbqaaSoftKMVF/thumbs/thumb175x175.webp)
To start the McCulloch M400 Exclusive, ensure the mower is on a flat surface. Press the primer bulb 3-5 times, hold the handle lever, and pull the starter cord firmly.
Use unleaded gasoline with a minimum octane rating of 87. Avoid using ethanol blends higher than E10.
Change the oil after the first 5 hours of use, then every 25 hours of operation or at the beginning of each mowing season.
Check if the blade is dull or damaged and the wheels are set at the same height. Also, ensure the deck is clear of debris.
Disconnect the spark plug, tilt the mower sideways, and use a brush or hose to remove grass clippings and debris from the deck.
Check the fuel level, ensure the spark plug is connected, and verify the air filter is clean. Inspect the primer bulb and fuel line for damage.
Use the height adjustment lever located near each wheel to raise or lower the deck to your desired cutting height.
Yes, the mower is equipped with a mulching feature. Ensure the mulching plug is installed and the discharge chute is closed.
Empty the fuel tank, clean the mower thoroughly, and store it in a dry, sheltered area. It's recommended to remove the battery if applicable.
Regularly check and clean the air filter, change the oil, inspect the blade for sharpness, and ensure all nuts and bolts are tight.