McCulloch M40 S Spare Parts List

To start the McCulloch M40 S Lawn Mower, ensure the fuel tank is filled and the oil level is adequate. Pull the safety lever towards the handle, then pull the starter rope briskly.
Check if there is enough fuel and that the spark plug is connected properly. Inspect the air filter for clogs and ensure the oil level is sufficient.
Sharpen the blades at least once a season or after every 25 hours of use for optimal performance.
Use unleaded gasoline with a minimum octane rating of 87. Avoid using gas with more than 10% ethanol.
Disconnect the spark plug and tilt the mower carefully. Use a hose to rinse off grass clippings and debris, then dry the deck thoroughly to prevent rust.
Check for any debris stuck in the blade area and ensure the blade is not bent. Tighten any loose bolts and inspect the engine mounting.
Warm up the engine, then turn it off and disconnect the spark plug. Tilt the mower and drain the old oil into a container. Refill with the recommended oil type and level.
Perform maintenance checks every 25 hours of use, including oil changes, air filter cleaning, blade sharpening, and inspection for loose parts.
Locate the height adjustment lever near each wheel and move it to your desired cutting height. Ensure all wheels are set to the same height for an even cut.
Check for clogs in the discharge chute and ensure the grass isn't too tall or wet. Inspect the air filter and fuel system for blockages.