McCulloch M3540 PD Argos Spare Parts List
![McCulloch M3540 PD Argos manual cover](/images/eAAiIbYVJzrQQHDSiEmZdZnI/thumbs/thumb175x175.webp)
To start the McCulloch M3540 PD, ensure the fuel tank is filled, the oil level is adequate, and the spark plug is connected. Pull the starter rope firmly while holding the safety lever against the handle.
Check the fuel level, ensure the spark plug is not fouled, and verify that the air filter is clean. If the problem persists, consult the user manual or contact customer support.
It is recommended to sharpen the blades at least once a mowing season or more frequently if you notice a decrease in cutting performance.
To adjust the cutting height, locate the height adjustment lever on the wheels and move it to the desired position. Ensure all wheels are set to the same height for an even cut.
Use SAE 30 oil for temperatures above 32°F (0°C) and SAE 10W-30 for temperatures below 32°F (0°C). Always refer to the user manual for specific oil recommendations.
Routinely check and replace the air filter, change the oil, inspect the spark plug, and ensure the blades are sharp. Clean the mower deck after each use to prevent grass buildup.
Drain the fuel tank or add a fuel stabilizer, clean the mower thoroughly, and store it in a dry, sheltered location. Disconnect the spark plug to prevent accidental starting.
First, disconnect the spark plug. Remove the mower deck and locate the belt. Remove the old belt and install the new one, ensuring it is properly aligned on the pulleys. Reattach the deck and reconnect the spark plug.
Uneven cutting can be caused by dull blades, incorrect wheel height settings, or an uneven lawn surface. Check the blades, adjust the wheel heights, and mow a different direction if necessary.
Ensure the mower is off and cool. Use a scraper or brush to remove grass clippings from the deck. Wipe down the exterior with a damp cloth and avoid using water on the engine or electrical components.