McCulloch M12592RB Spare Parts List

To start the McCulloch M12592RB, ensure the mower is on a flat surface. Engage the parking brake, set the throttle to 'choke', and turn the ignition key to start the engine. Once started, move the throttle to the 'fast' position.
Check the fuel level and ensure fresh fuel is used. Verify that the spark plug is clean and properly connected. Also, check the air filter for clogs and clean or replace it if necessary.
It is recommended to change the oil after the first 5 hours of use and then every 50 hours of operation or at the start of each season.
Use unleaded gasoline with a minimum octane rating of 87. Avoid using fuel with more than 10% ethanol to prevent engine damage.
To adjust the cutting height, locate the height adjustment lever on each wheel. Move the lever to the desired position to set the mowing height. Ensure all wheels are set to the same height for an even cut.
Excessive vibration may be caused by a damaged blade, loose parts, or debris stuck to the blade. Inspect the blade for damage and ensure all components are securely fastened. Clean the mower deck to remove any debris.
Keep the battery terminals clean and free of corrosion. Store the battery in a cool, dry place during off-seasons. Charge the battery regularly, especially before storing it for an extended period.
To sharpen the blades, first disconnect the spark plug and remove the blade from the mower. Use a file or a bench grinder to sharpen the blade, maintaining the original angle. Balance the blade before reinstalling.
Refer to the owner's manual for the exact tire pressure specifications, but generally, it should be around 14 PSI for rear tires and 10 PSI for front tires.
After ensuring the mower is off and cool, tilt the mower and use a brush or scraper to remove grass clippings and debris from the underside of the deck. For best results, clean the deck after each use.