McCulloch M115T92 Spare Parts List
![McCulloch M115T92 manual cover](/images/wyVWUBgyGEWzellOqpYvAbXK/thumbs/thumb175x175.webp)
To start the McCulloch M115T92 lawn mower, ensure the fuel tank is filled, the battery is charged, and the parking brake is engaged. Then, turn the ignition key to the 'Start' position and release it once the engine starts.
Use unleaded gasoline with an octane rating of at least 87. Avoid using gasoline with more than 10% ethanol content.
To replace the cutting blades, ensure the mower is turned off and the spark plug is disconnected. Tilt the mower to access the blades, remove the blade bolts, and replace the old blades with new ones. Secure the bolts tightly before lowering the mower.
Check the fuel level, battery charge, and ensure the spark plug is not fouled. Also, make sure that the choke is properly set and the air filter is clean.
It's recommended to change the oil after every 50 hours of operation or at least once per mowing season. Always refer to the owner's manual for specific guidelines.
To adjust the cutting height, locate the height adjustment lever on each wheel. Move the lever to the desired position, ensuring all wheels are set to the same height.
Regularly check the battery terminals for corrosion and clean them if necessary. Ensure the battery is fully charged, especially before long periods of storage.
Ensure the blades are sharp and clean, keep the undercarriage free of debris, and mow regularly to prevent the grass from becoming too long.
Check for loose or damaged blades and ensure they are properly balanced. Inspect the deck for any accumulated debris and clean it if necessary.
Clean the mower thoroughly, remove the battery, and store it in a cool, dry place. Drain the fuel or add a fuel stabilizer, and cover the mower to protect it from dust and moisture.