McCulloch LM4546 SDX Spare Parts List
![McCulloch LM4546 SDX manual cover](/images/ZFkViwEheMZQadWzenwDeaeo/thumbs/thumb175x175.webp)
To start the McCulloch LM4546 SDX, ensure that the fuel tank is filled and the oil level is adequate. Press the primer bulb 3-5 times, then pull the starter rope firmly until the engine starts.
Check the fuel level, ensure the spark plug is clean and connected, and inspect the air filter for blockages. If the problem persists, consider checking the carburetor or contacting a professional technician.
It is recommended to change the oil every 25 hours of use or at the beginning of each mowing season to ensure optimal performance.
Use unleaded gasoline with a minimum octane rating of 87. Avoid using gasoline with more than 10% ethanol to prevent engine damage.
To sharpen the blades, disconnect the spark plug, remove the blade, and use a file or sharpening stone to hone the cutting edges. Ensure the blade is balanced before reattaching.
After use, disconnect the spark plug, use a garden hose to rinse the underside, and wipe down the exterior with a damp cloth. Ensure the mower is completely dry before storage.
Excessive vibration can be caused by an unbalanced blade, loose bolts, or debris lodged in the mower deck. Check and tighten any loose components and ensure the blade is balanced.
To adjust the cutting height, locate the height adjustment levers on each wheel and move them to the desired position. Ensure all wheels are set to the same height for an even cut.
Before storing for winter, drain the fuel tank, change the oil, clean the mower thoroughly, and remove the battery if applicable. Store in a dry place to prevent rust and corrosion.
To replace the air filter, locate the filter cover, remove the old filter, and install a new one of the same type. Ensure the cover is securely fastened after replacement.