McCulloch LM3546 S Spare Parts List
![McCulloch LM3546 S manual cover](/images/ixNJBRlbIiccIsHPSOzujFhd/thumbs/thumb175x175.webp)
To start the McCulloch LM3546 S, first ensure the mower is on a flat surface. Engage the parking brake, then pull the choke lever if the engine is cold. Finally, pull the starter rope firmly.
If the mower doesn't start, check the fuel level, ensure the spark plug is connected, and verify that the air filter is clean. Also, make sure the starter rope is being pulled with sufficient force.
Change the oil after the first 5 hours of use, then every 25 hours or at the start of each mowing season. Use SAE 30 oil for optimal performance.
Use unleaded gasoline with a minimum octane rating of 87. Avoid using ethanol blends higher than 10% to prevent engine damage.
To adjust the cutting height, use the height adjustment lever located near the wheels. Move the lever to the desired position to set the cutting height between 1 and 3 inches.
Before storing, drain the fuel tank, disconnect the spark plug, clean the mower deck, and check all components for wear or damage. Store in a dry, sheltered location.
First, disconnect the spark plug for safety. Remove the blade and use a file or sharpening tool to sharpen the cutting edge evenly. Reinstall the blade securely.
Excessive vibration may indicate a damaged blade or loose parts. Check the blade for damage and ensure all bolts and screws are tightened securely.
Remove the air filter cover, take out the filter, and gently clean it with soapy water. Allow it to dry completely before reinstalling. Replace if damaged.
Wear protective eyewear and sturdy footwear. Clear the mowing area of debris, and never operate the mower in wet conditions. Always follow the user manual instructions.