McCulloch LM1340E Spare Parts List
![McCulloch LM1340E manual cover](/images/CJlsvyVoOWWXYaHfpxlRuyHp/thumbs/thumb175x175.webp)
To start the McCulloch LM1340E Lawn Mower, ensure the battery is fully charged. Insert the safety key into its slot, press the start button, and pull the bail handle towards the handlebar to engage the motor.
If the mower doesn't start, check if the battery is charged, the safety key is inserted, and the start button is functioning. Also, inspect for any loose connections or debris blocking the blade.
To adjust the cutting height on the LM1340E, locate the height adjustment lever near the wheel. Move the lever to the desired position to raise or lower the cutting deck.
It is recommended to clean the mower after each use to remove grass clippings and debris, which can affect performance and longevity.
Regular maintenance includes cleaning the mower, checking and charging the battery, sharpening the blade, and inspecting for any worn or damaged parts.
To replace the blade, ensure the mower is turned off and disconnected from the power source. Tilt the mower to access the blade, use a wrench to remove the blade bolt, and replace the old blade with a new one. Securely tighten the bolt.
If the mower is not cutting evenly, check if the blade is sharp and properly installed. Also, ensure that the deck is level and adjust the cutting height if necessary.
It is not recommended to mow wet grass as it can clog the mower deck and affect performance. Wait until the grass is dry for optimal results.
Before storing, clean the mower thoroughly, charge the battery fully and remove it from the unit. Store the mower in a dry, cool place, ensuring all parts are dry to prevent rust.
Always wear appropriate footwear and safety glasses. Remove any obstacles from the mowing area, avoid mowing on slopes, and never use the mower in wet conditions to prevent slipping.