McCulloch Lawnmac 4045PDE Spare Parts List
![McCulloch Lawnmac 4045PDE manual cover](/images/YwZSKyxldJARhTDVyKahjkwS/thumbs/thumb175x175.webp)
To start the McCulloch Lawnmac 4045PDE, ensure the fuel tank is filled and the oil level is adequate. Turn the ignition key to the 'start' position and pull the starter rope gently until resistance is felt, then pull briskly.
Use unleaded gasoline with an octane rating of at least 87. Avoid using gasoline that contains more than 10% ethanol.
Change the oil after the first 5 hours of use, then every 25 hours of operation or at the start of each mowing season.
First, check the fuel and oil levels. Ensure the spark plug is clean and properly connected. Inspect the air filter for clogs and clean or replace it as needed.
To adjust the cutting height, locate the height adjustment lever on each wheel. Move the lever to the desired height position, ensuring all four wheels are set the same.
Perform a basic check before each use, including fuel, oil, and air filter. Sharpen the blade every 25 hours of use and perform a comprehensive inspection annually.
Turn off the mower and disconnect the spark plug. Tilt the mower to one side, ensuring the air filter and carburetor face upwards to avoid contamination. Use a hose to rinse the underside and remove grass clippings.
Check if the blade is dull or damaged. Sharpen or replace it as necessary. Make sure the blade is securely fastened and balanced.
Drain the fuel tank or add a fuel stabilizer. Change the oil and clean the mower thoroughly. Store it in a dry place and cover it to protect against dust and moisture.
Excessive vibration may be due to an unbalanced blade or loose parts. Check the blade alignment and tighten any loose bolts or screws.