McCulloch LawnMac 2037 E Spare Parts List
![McCulloch LawnMac 2037 E manual cover](/images/uFkTnwCNUoPfWCdQqmSsrqzY/thumbs/thumb175x175.webp)
To start the McCulloch LawnMac 2037 E, ensure that it is on a flat surface, check the fuel level, and engage the safety lever before pulling the starter rope.
Use unleaded gasoline with a minimum octane rating of 87 for optimal performance. Avoid using ethanol blends higher than E10.
Check the spark plug, ensure the fuel is fresh, and verify that the air filter is clean. If the problem persists, consult the user manual or contact customer support.
Change the oil after the first 5 hours of use and then every 25 hours of operation or at the beginning of each mowing season.
Clean the mower thoroughly, drain the fuel tank, change the oil, and store it in a dry place. Removing the spark plug and adding a few drops of oil into the cylinder can prevent rust.
Locate the height adjustment lever on each wheel and set them to the desired cutting height, ensuring all wheels are at the same level for an even cut.
Ensure the blade is sharp and balanced, check the cutting height settings, and mow at a slower pace to allow the blade to cut efficiently.
Remove the blade following the instructions in the manual, secure it in a vice, and sharpen it using a file or a sharpening stone, maintaining the original angle of the blade edge.
Check for debris clinging to the blade, ensure the blade is balanced and tightly secured, and inspect the engine mounts for any damage.
Locate the air filter cover, remove it, and take out the old filter. Insert a new filter and secure the cover back in place. Always use a genuine McCulloch replacement filter for best results.