McCulloch Lawn Mac 4600 Series Spare Parts List
![McCulloch Lawn Mac 4600 Series manual cover](/images/wTDIgRsghAqjudCqVTDdLsNy/thumbs/thumb175x175.webp)
To start the McCulloch Lawn Mac 4600, ensure the fuel valve is open, the throttle is set to 'choke' if the engine is cold, and the safety lever is engaged. Then, pull the starter rope firmly.
Use regular unleaded gasoline with an octane rating of 87 or higher. Avoid using ethanol blends higher than 10%.
Change the oil after the first 5 hours of use for a new mower, then every 25 hours of use or at the beginning of each mowing season.
Check the fuel level, ensure the spark plug is connected, and inspect the air filter for clogs. Also, verify that the safety lever is engaged.
Disconnect the spark plug wire to ensure safety. Use a garden hose to rinse off grass clippings and debris from the cutting deck. Allow it to dry before reconnecting the spark plug.
Locate the cutting height adjustment levers on each wheel. Move the levers to your desired height setting, ensuring all wheels are set equally for an even cut.
Drain the fuel tank, change the oil, clean the mower thoroughly, and remove the battery if applicable. Store in a dry, sheltered location.
Disconnect the spark plug and tip the mower onto its side. Remove the blade and use a file or sharpening stone to sharpen the cutting edge. Reinstall the blade securely.
Check for debris build-up under the deck, inspect the blade for damage, and ensure all nuts and bolts are tightened. Replace any damaged parts.
Locate the air filter cover, remove it, and take out the old filter. Insert a new filter and reattach the cover securely.