McCulloch Cabrio Plus 257 L Spare Parts List
![McCulloch Cabrio Plus 257 L manual cover](/images/zQQQnZJceiCjqDMHHCpxlrmD/thumbs/thumb175x175.webp)
To start the McCulloch Cabrio Plus 257 L, ensure the switch is in the 'ON' position, press the primer bulb several times until fuel is visible, set the choke lever to the 'START' position, pull the starter rope until the engine fires, then move the choke lever to 'RUN'.
Use unleaded gasoline mixed with high-quality 2-stroke engine oil at a ratio of 40:1. Always mix fuel in a separate container before filling the tank.
Regularly check and replace the cutting line as needed and ensure the trimmer head is free of debris. Sharpen or replace the blades periodically if your model is equipped with a metal blade.
If the engine won't start, check the fuel mixture, inspect the spark plug for wear or fouling, ensure the air filter is clean, and confirm the ignition switch is 'ON'.
To clean the air filter, remove the cover, take out the filter, and wash it with warm soapy water. Rinse thoroughly, let it dry, and apply a small amount of clean 2-stroke oil before reinstalling.
Regular maintenance should be performed every 25 hours of operation. This includes checking the spark plug, cleaning the air filter, and inspecting the fuel system.
Drain the fuel tank, run the engine until it stops to clear the carburetor, clean the unit thoroughly, and store it in a dry, sheltered location.
Excessive vibration can be caused by an unbalanced or damaged cutting attachment. Check for debris accumulation and ensure all components are properly tightened.
To replace the trimmer line, remove the spool from the trimmer head, cut a length of new line, and wind it onto the spool according to the directional arrows, then reattach the spool.
Always wear protective gear, including gloves, eye protection, and sturdy footwear. Keep bystanders at a safe distance and be cautious of flying debris.