McCulloch BA17107C Spare Parts List
![McCulloch BA17107C manual cover](/images/YdUVYKFpNgWLRHIxFKztkrNG/thumbs/thumb175x175.webp)
To start the McCulloch BA17107C Lawn Mower, ensure the fuel tank is filled, the oil level is adequate, and the spark plug is connected. Set the throttle to the 'Start' position, pull the starter cord firmly until the engine starts.
If the lawn mower does not start, check the fuel level, inspect the spark plug for wear or damage, ensure the air filter is clean, and make sure the fuel valve is open.
To improve cutting performance, regularly sharpen the blades, mow with a full gas tank, and avoid cutting wet grass. Adjust the cutting height to suit grass conditions.
Regular maintenance includes changing the oil, cleaning or replacing the air filter, sharpening the blades, and checking the spark plug. Refer to the user manual for a detailed maintenance schedule.
To clean the lawn mower, ensure it is turned off and cool. Use a brush or cloth to remove grass clippings from the deck and wheels. Avoid using water directly on the engine or electrical parts.
Excessive vibration may be caused by unbalanced blades, loose hardware, or debris caught in the mower deck. Check the blades for damage and ensure all bolts and screws are tightened.
For winter storage, clean the mower thoroughly, drain the fuel, change the oil, and remove the spark plug. Store it in a dry place, covering it to protect from dust and moisture.
For optimal performance, use SAE 30 oil in temperatures above freezing and SAE 10W-30 for colder conditions. Always refer to the user manual for specific recommendations.
Adjust the cutting height by using the height adjustment lever located on the wheels. Move the lever to the desired position to raise or lower the mower deck.
If there is an oil leak, check for loose or damaged oil drain plugs, seals, or gaskets. Tighten or replace as necessary and ensure the mower is kept on a level surface.