McCulloch BA12592RBA Spare Parts List
![McCulloch BA12592RBA manual cover](/images/CnAkahpDLVqDNxleMTSVUZRE/thumbs/thumb175x175.webp)
To start the McCulloch BA12592RBA lawn mower, ensure the fuel tank is filled, check the oil level, and set the throttle to the starting position. Pull the starter rope firmly while holding down the safety lever.
If the lawn mower won't start, check the fuel level, ensure the spark plug is clean and connected, inspect the air filter for clogs, and verify that the safety lever is engaged.
Change the oil in your McCulloch BA12592RBA lawn mower after the first 5 hours of use and then after every 25 hours of use or annually, whichever comes first.
To replace the mower blade, disconnect the spark plug, tip the mower on its side, and use a wrench to remove the blade bolt. Install the new blade, ensuring it is aligned correctly, and tighten the bolt securely.
Use unleaded gasoline with an octane rating of 87 or higher. Avoid using gasoline with more than 10% ethanol to prevent engine damage.
To clean the air filter, remove the filter cover, take out the filter, and wash it in warm soapy water. Rinse thoroughly and let it dry completely before reinstalling.
If the mower vibrates excessively, check for a damaged or unbalanced blade, loose bolts, or debris lodged in the cutting deck. Ensure all components are secure and balanced.
To adjust the cutting height, locate the height adjustment lever on each wheel and move it to the desired position. Ensure all wheels are set to the same height for an even cut.
Uncut grass patches may indicate a dull blade, incorrect cutting height, or mowing too quickly. Sharpen or replace the blade and adjust the mowing speed and height accordingly.
To store the mower for winter, drain the fuel tank, clean the mower thoroughly, and change the oil. Store in a dry, sheltered location and cover to protect from dust and moisture.