McCulloch 97HRB Spare Parts List

To start the McCulloch 97HRB, ensure the fuel tank is filled, the oil level is adequate, and the spark plug is connected. Pull the starter cord firmly while holding the safety lever.
Use unleaded gasoline with an octane rating of 87 or higher for optimal performance. Avoid using ethanol blends higher than E10.
Change the oil after the first 5 hours of use, and then every 25 hours of operation or at the start of each mowing season.
Disconnect the spark plug, tilt the mower to the side, and use a brush or a hose to remove grass clippings and debris from the deck. Dry thoroughly to prevent rust.
Check the fuel level, ensure the spark plug is connected and clean, and inspect the air filter for blockages. If problems persist, consult the manual or a professional.
Drain the fuel tank, clean the mower thoroughly, change the oil, and remove the spark plug. Store in a dry location.
Locate the height adjustment lever near the wheels. Move the lever to the desired setting to adjust the cutting height. Ensure all wheels are set to the same height.
Excessive vibration might be caused by a damaged blade, loose parts, or debris lodged in the mower. Inspect the blade and tighten any loose components.
Disconnect the spark plug wire, use a spark plug wrench to remove the old plug, and install a new one. Ensure it is tightened securely but not over-tightened.
Check if the blade is dull or damaged and sharpen or replace it as necessary. Ensure the mower is set to the correct height and that you're not mowing too fast.