Mazda CX-5 2019 Navigation Manual
![Mazda CX-5 2019 manual cover](/images/4cd44519af461c4f23d61cdb/thumbs/thumb175x175.webp)
To reset the TPMS, first ensure all tires are inflated to the recommended pressure. Then, turn the ignition to the ON position without starting the engine. Navigate to the 'Settings' menu on the infotainment screen, select 'Vehicle,' then 'TPMS Reset,' and follow the on-screen instructions.
The recommended oil type for the Mazda CX-5 2019 is SAE 0W-20. The engine oil capacity is approximately 4.5 quarts (4.3 liters) with a filter change. Always check the owner's manual for confirmation.
To pair your smartphone, activate Bluetooth on your device. On the Mazda Connect system, go to 'Settings,' select 'Connectivity Settings,' and then 'Bluetooth.' Choose 'Add New Device,' and select your phone from the list. Confirm the pairing code on both devices to complete the process.
The check engine light can be triggered by various issues, such as a loose gas cap, faulty oxygen sensor, or other engine-related problems. It's advisable to use an OBD-II scanner to read the diagnostic trouble codes or visit a Mazda service center for a thorough inspection.
For optimal performance, perform an oil and filter change every 7,500 miles or 12 months. Inspect the brake system, tires, and battery regularly. Rotate tires every 7,500 miles, and replace the cabin air filter every 30,000 miles. Always refer to the maintenance schedule in the owner's manual.
To replace the cabin air filter, open the glove compartment and remove the damper. Squeeze the sides of the glove box inward to lower it completely. Locate the cabin air filter cover, unclip it, and remove the old filter. Insert the new filter with the airflow arrows pointing down, and reassemble everything in reverse order.
If the key fob battery is low, replace it with a new CR2025 battery. Use a small screwdriver to carefully open the key fob case, remove the old battery, and insert the new one with the positive side facing up. Reassemble the key fob and test its functionality.
To engage sport mode, locate the sport mode switch near the gear lever. Slide the switch to the 'SPORT' position. An indicator light will appear on the dashboard, signaling that sport mode is active, enhancing throttle response and transmission performance.
To jump-start, first ensure both vehicles are turned off. Connect the positive cable to the positive terminal of the dead battery, then to the positive terminal of the good battery. Connect the negative cable to the negative terminal of the good battery, and finally, attach the other end to an unpainted metal surface on the engine block of the dead car. Start the assisting vehicle, then the Mazda CX-5. Allow it to run for a few minutes before disconnecting cables in reverse order.
To use the navigation system, press the 'NAV' button on the infotainment system. Enter your destination using the search bar or select from the map. Follow the on-screen prompts to start navigation. You can also use voice commands for hands-free operation.