Mazda 6 2014 User Guide Manual
![Mazda 6 2014 manual cover](/images/bc395fd7a2c736b481b6ec62/thumbs/thumb175x175.webp)
To reset the maintenance light, turn the ignition to the "ON" position without starting the engine. Press the "INFO" button until the wrench icon appears. Hold the "INFO" button for a few seconds until the light resets.
Mazda recommends using SAE 0W-20 oil for the 2014 Mazda 6 for optimal performance and fuel efficiency.
To improve fuel efficiency, ensure regular maintenance, keep tires properly inflated, drive smoothly, and reduce excess weight in the vehicle.
The recommended tire pressure for a Mazda 6 2014 is generally 32 psi for both front and rear tires. Check the tire placard on the driver's side door for specific information.
To replace the cabin air filter, open the glove box, remove the damper arm, press in the sides of the glove box to release it, and access the filter cover behind it. Replace the old filter with a new one and reassemble.
A squealing noise usually indicates worn brake pads. Inspect the brake pads and replace them if necessary. Also, check for any debris or glazing on the rotors.
To pair your phone, enable Bluetooth on your device. On the car's infotainment system, navigate to "Settings" > "Bluetooth" > "Add New Device". Select your phone from the list and confirm the pairing code.
Common causes include a loose gas cap, faulty oxygen sensor, mass airflow sensor issues, or a malfunctioning catalytic converter. A diagnostic scan tool can identify specific error codes.
Mazda generally recommends changing the transmission fluid every 60,000 to 100,000 miles. However, consult your owner's manual for specific intervals based on your driving conditions.
The 2014 Mazda 6 is not designed for towing and does not have a specified towing capacity. It is recommended to avoid towing with this vehicle to prevent damage.