Matsui MWM1000E User Manual

To start a washing cycle, load your laundry into the drum, add detergent to the dispenser, close the door, select the desired wash program using the control knob, and press the start button. The machine will begin washing shortly after.
Ensure the power cord is plugged in and the power outlet is functioning. Check that the door is properly closed and the water supply is connected and turned on. Verify that the start button has been pressed and the selected program is correct.
To clean the detergent drawer, pull it out gently until it stops. Press the release button to remove it completely. Rinse with warm water to remove detergent residue, and use a brush for stubborn deposits. Reinsert the drawer after cleaning.
Regular maintenance includes cleaning the detergent drawer, checking and cleaning the rubber door seal, and running a hot wash cycle with no load using a washing machine cleaner to prevent mold and detergent buildup.
If the machine is not draining, check the drain hose for kinks or blockages. Ensure the pump filter is clean and not obstructed by debris. Also, make sure the drain hose is positioned correctly above the drain outlet.
To reset the washing machine, turn the program selector to the off position. Wait for a few seconds, and then select the desired program again. Press the start button to begin the cycle.
Noisy operation may be due to an unbalanced load. Pause the machine and redistribute the laundry evenly. Ensure the machine is level and not in contact with other objects. Check for foreign objects in the drum and pump filter.
Use the correct amount of detergent for the water hardness and load size. Avoid overloading the machine, and select the appropriate program for the fabric type. Regular cleaning of the machine also helps maintain washing performance.
To prevent mold, leave the door and detergent drawer open after each wash to allow moisture to escape. Regularly clean the door seal and run a maintenance wash with a machine cleaner every month.
Excessive vibration can occur if the machine is not level or if the load is unbalanced. Adjust the feet to level the machine and redistribute the laundry evenly. Ensure the machine is on a stable surface.