Matsui MUL1107WW Instruction Manual
![Matsui MUL1107WW manual cover](/images/UPhriWcwIWibyATzRgIfLCOc/thumbs/thumb175x175.webp)
To adjust the temperature, locate the thermostat dial inside the larder. Turn the dial clockwise to lower the temperature and counterclockwise to increase it.
Ensure that the larder is plugged in and the thermostat is set correctly. Check if the door seals are intact and clean, and ensure there is adequate ventilation around the appliance.
The Matsui MUL1107WW Larder is a manual defrost model. It is recommended to defrost it when the ice build-up reaches about 3-5 mm thickness to ensure optimal performance.
Unusual noises can be caused by the larder not being level, items inside rattling, or the compressor functioning. Ensure the larder is on a level surface and check for loose items.
Disconnect the larder from the power supply, remove all food and shelves, and clean the interior with a mixture of warm water and mild detergent. Rinse with clean water and dry with a soft cloth.
Place heavier items on the bottom shelves and lighter ones above. Ensure there is space for air circulation around each item for consistent cooling.
To change the light bulb, unplug the larder, remove the bulb cover by unscrewing it, and replace the bulb with a new one of the same type and wattage. Secure the cover back in place.
Yes, the door can be reversed. Refer to the user manual for detailed instructions on safely reversing the door hinge. Ensure the larder is unplugged before starting this process.
Keep the larder away from heat sources, ensure the door seals are clean and intact, and avoid opening the door frequently. Set the thermostat to the recommended setting for optimal efficiency.
Check if the door seal is dirty or damaged, and ensure that no items inside are obstructing the door. Adjust the leveling feet to make sure the larder is level.