Matsui MF2WE Instruction Manual
![Matsui MF2WE manual cover](/images/adlCKZUQISASxeARAnJEaMcU/thumbs/thumb175x175.webp)
To start a wash cycle, load your dishes, add detergent, close the door, select a wash program using the program selector, and press the start button.
Check the drainage hose for blockages, ensure the sink drain is clear, and inspect the dishwasher filter for debris. Clean as necessary.
Ensure that the spray arms are not blocked, check that you are using the correct amount of detergent, and verify that dishes are loaded correctly without obstruction.
Regularly clean the filter, check and clean the spray arms, wipe down the door seals, and run an empty cycle with a dishwasher cleaner once a month.
To reset the dishwasher, turn off the power by unplugging it or switching off the circuit breaker for 1 minute, then restore power and restart the machine.
Use high-quality dishwasher detergent tablets or powder. Avoid using dish soap or hand soap as they can cause excessive sudsing.
Remove the lower rack to access the filter, twist the filter counterclockwise to remove it, rinse under running water to remove debris, and replace it securely.
Ensure that no items are obstructing the spray arms, check for loose utensils or dishes, and make sure the dishwasher is level and secured in place.
Use a rinse aid to enhance drying, ensure the rinse aid dispenser is full, and select a higher temperature wash or drying cycle if available.
Check for obstructions around the door or racks, ensure that the latch is not damaged, and verify that the dishwasher is level and properly installed.